The price of a metal laser cutting machine ranges from tens of thousands to hundreds of thousands. The high price paid allows users to take extra care when using it and strictly abide by the rules of use of the metal laser cutting machine. The laser emitted from the laser by the laser cutting machine manufacturer is focused into a high-power density laser beam through the optical path system. The laser beam irradiates the surface of the workpiece to make the workpiece reach the melting point or boiling point, and the high-pressure gas coaxial with the beam blows away the molten or vaporized metal. The correct use skills of the metal laser cutting machine can make the equipment reach the highest efficiency and the best quality, so that the expensive price will be repaid as soon as possible. If the operation control method is wrong, not only the cutting effect is not satisfactory, but also the life of the metal laser cutting machine will be reduced, and even more serious will threaten the life of the operator. So what are the use skills of metal laser cutting machine?
- Check the steel belt before use to ensure it is in tension. The metal laser cutting machine is specially used to cut and process the laser cutting equipment of metal materials. At present, the mainstream of the market is co2 laser cutting machine, fiber laser cutting machine, and YAG laser cutting machine. Among them, co2 laser cutting machine has strong cutting ability and wide range. The mainstream laser cutting equipment in the market, fiber laser cutting machine is a new technology in recent years, coupled with relatively low technical requirements, metal laser cutting machine equipment is gradually popular. Otherwise, if there is a problemduring operation, it may hurt people and seriously threaten life safety. Therefore, it is very important to do a good job in the details, and it is necessary to do a good job in daily inspection.
- Use a vacuum cleaner to remove dust and dirt from the machine once a week. All electrical cabinets should be closed and dust-proof.
- Check the straightness of the track and the verticality of the machine every six months, and promptly maintain and debug if it is abnormal. If this is not done, it is possible that the effect of the segmentation will not be very good, the error will increase, and the influence will affect the cutting quality. This is the top priority and must be done.
- The guide rails should be cleaned frequently to remove dust and other debris to ensure that the equipment is normal. The rack should be wiped frequently and lubricated to ensure lubrication without debris. The guide rail should be cleaned and lubricated frequently, and the motor should also be cleaned and lubricated frequently. The laser segmentation machine can move better during the movement, and cut more accurately. Product quality will improve.
- The double-focus laser segmentation head is a vulnerable item on the metal laser cutting machine. Long-term use will cause damage to the laser cutting head. Metal laser cutting machine is specially used to cut and process the laser cutting equipment of metal materials. At present, the mainstream on the market is Co2 laser cutting machine, fiber laser cutting machine, and YAG laser cutting machine. Among them, Co2 laser cutting machine has strong cutting ability and wide range. The mainstream laser cutting equipment in the market, fiber laser cutting machine is a new technology in recent years, coupled with relatively low technical requirements, metal laser cutting machine equipment is gradually popular.
- Check and repair regularly. If there is deformation or other forms, you should know that the laser cutting head is a bit damaged at this time and needs to be replaced. If it is not replaced, it will affect the cutting quality and increase the cost. Some products may have to undergo secondary processing to reduce the production efficiency. The laser cutting head should be produced by a professional manufacturer, and it should be checked carefully when it is purchased, so as to avoid problems when it is used.