wood CNC router machine various software operations

wood CNC router machine knowledge: application of wood CNC router machine various materials.wood CNC router machine various software operations: The following training can be carried out by the software after training.

Training software focused in the areas of user applications; users do not need to be self-respect on the basis of the training manual. Software requirements: generate a variety of publishing software, a variety of operations, the path can quickly find the wrong path and so on.

Wood engraving machine tool selection from the technical and economic aspects into account to select the overall cutter, cutting the object according to the nature and requirements. Overall cutter welding, assembly, milling cutters and combinations.

Or assembly cutter, cutter rotation direction is based on the direction of rotation and arbor wood engraving machine spindle and feed the workpiece relative position determined either in whole cutter. Cutting edge inclination relative to the cutter radius determines the cutter.

Feed rate and depth milling workpiece. Depending on the radius of the milling cutter cutting speed and cutter. Feed speed of the workpiece depends on the machining surface quality requirements. Cutting process is dependent on the feed rate per tooth milling,  wood carving cnc router machine cutting the amount of advertising engraving machine milling cutter cutting, including the appearance of a large extent of cutting the workpiece roughness.

Feed per tooth is too large, too rough machining appearance, feed per tooth is too small, there will be charred exterior processing, therefore, feed per tooth cutter content must be appropriate.

Wood engraving machine business, personnel stability, general R & D department, production department, sales department, freight, service department, there are certain technical deep, production management science, machine quality assurance, with the rest assured. Engraving machine selection process, the company’s strength is important, therefore, to select manufacturers, choose guaranteed.

Familiar with the different materials, the scope of application of information: Operating personnel must be familiar with all kinds of information applications. Different thicknesses, different waste size. In this regard, experts said wood engraving machine operator should be familiar with the different ways in different engraving information.

Our wood carving cnc router machine is mainly used to make wood works, wood router machine can do both cutting and 3D engraving works which are widely used for wood door, furniture, kitchen ware, windows, wood cabinet etc
Wood engraving machine routine maintenance precautions
Routine maintenance is essential for woodworking engraving machine engraving machine life, there is sure to pay attention to the following aspects.

1.Unplug the power cord. Safety first

2. Remove the plastic sheath, take Phillips screwdriver counter-clockwise to unlock the two screws.

3, the word screwdriver to take off his brushes screw counter-clockwise around a pair of needle nose pliers to remove the carbon brushes with carefully brushes mark the installation location, only a smooth recovery.

4, with the dust CNC router machine on the brush to clean brushes. When air gun spray it lightly.

5, the shell slightly clawed force.

6, rotating about the motor shaft with your fingers, touch the machine if there is sound, the sound of metal friction.

7, no longer determine the dust with oil-purpose sewing machine, drop in a little circle into the cracks on the fingers under the axis of rotation, to ensure that eat oil.

8, clean the remaining oil, or else rub on the future of dust.

9, in accordance with the above steps, the device recovery.

10, after more than a locking screw, the first finger spin and see along the flow, brushes installed good, determined not abnormal.

11, plug boot, to boot sound normal!

Jinan MORN Technology Co.,Ltd is located in the high-tech development zone in Jinan city, north of China. Our company is the professional manufacturer and exporter of mechanical CNC router machine, laser machine and other relevant equipment.

Phone: +0086 531 66982237
Fax: +0086 531 88692337
Email: info@morntech.com
Add:High-tech development zone,Jinan city
Our cnc router website:www.morntech.com

Leave a Reply

Your email address will not be published. Required fields are marked *