To the laser engraver machine “doing mask” approach

To the laser engraver machine “doing mask” approach

Laser engraving machine is a tool to work long hours, high-intensity laser engraving machine to work long hours in the use of laser engraving machine, when in order to ensure the normal use of laser engraving machine, we need our daily attention to the laser engraving machine maintenance work this will reduce the failure rate of laser engraving machine,destop laser engraver cutter machine  the following specific introduction for everyone how to properly care about the laser engraving machine.

Scope of laser engraving machine is very light, the use of laser engraving machine time if fails to stop, to avoid major problems, before using the laser engraving machine to perform a simple check to ensure the normal work of laser engraving machine, and daily attention to keep clean laser engraving machine, so as to reduce the use of laser engraving machine probability of failure to ensure the use of our normal work.
How to maintain the laser engraving machine

Engraving machine is a tool operation for a long time, rarely stop, and the use of high intensity, for the engraving machine is a danger, therefore engraving machine on the need for maintenance. To maintain good engraving machine, we must first understand the type of fault prone engraving machine, to be able to do maintenance engraving machines.

Hobby desktop laser engraver cutter machine is very popular in the market, for it is mini laser machine yet with multi functions, this laser engraver machine with up desktop mini laser engraving machine and down work table, it could also be added with rotary clamp, then could use it for glass cups and wine cups engraving.

No alarm failure. The first step is to check out the cause of the malfunction engraving machine, because they do not know the specific location of the fault, it is necessary engraving machines from various parts of the installation is appropriate, whether it should start with a solid screws and other small parts, and then step by step to troubleshoot a specific fault reasons. If it is ruled out hardware failures later, you can manually restore the machine to a mechanical origin. Carving failure. In the process of carving in the event of a fault, then you need to check whether it is because the screws loose causes, and to see whether it is the wrong path to their own operations, which leads to a failure to produce.

See it because the file is too large a result of failure to identify the cause of  the problem by, you can quickly restore normal working machine engraving machine overtravel alarm. This time, it shows run engraving machine has reached the limit position, and can no longer continue to run.

Laser engraving machine the face of this failure, we need to do is to check whether the design to be engraved exceeded the maximum range of engraving machine, or related accessories, etc. There are no loose screws, or coordinates value exceeds a predetermined maximum value. In overtravel time, only needs a manual mediation can make the smooth operation of engraving machine. After treatment failure, for the engraving machine, the most important thing is a routine maintenance. Engraving machine every day at work hobby laser engraver more than 10 hours later, we must carry out a cooling process, and timely check whether the cooling water temperature standards. While maintaining the water of the cooling water.

Jinan MORN Technology Co.,Ltd is located in the high-tech development zone in Jinan city, north of China. Our company is the professional manufacturer and exporter of mechanical CNC router machine, laser machine and other relevant equipment.

MORNTECH-CHINA(FACTORY)
Phone: +0086 531 66982237
Fax: +0086 531 88692337
Email: info@morntech.com
Add:High-tech development zone,Jinan city
Our cnc router website:http://www.morntech.com/

Leave a Reply

Your email address will not be published. Required fields are marked *