the use of laser engraving cutting machine should firmly adhere to the following rules

Laser engraving machine notes
1 If the machine has dust pollution will affect the output efficiency of the machine. Users should be kept clean lenses and lens. When applied in a clean special lens cleaning fluid. Wipe out along a direction from the inside with an absorbent cloth or lens tissue. If the laser machine dirty mirror and focusing mirror will seriously affect the output efficiency. Absorbent cotton cloth after washing once should be replaced.

2.The machine should be operated in a clean environment. Pump should be installed above the ground to prevent the absorption of dust.

3.The vent systems, blowers,  portable laser engraving machine prices debris clean-up system must be unobstructed. Open the blower fan and pump power is turned on, before you.

4.The screw connection: After a period of operation of the system, it will place some loose screw connection, the stability of the machine will be affected.

Note: when the machine is running must have staff beside guard.

Note the use of laser engraving machine [a]

1. The machine enclosure should contact with the ground.

2. Prohibition of non-professional high-voltage power supply. Do not break the shell. Require ventilation.
When the laser tube 3. The working cycle of the water required to make the laser tube overheating temperature. Therefore, before the machine is working, make sure to add some water to the cooling water pump inside. When the power is turned on, the pump began to work the machine starts running. Circulating water should be pure.

Check pipes for leaks, home laser engraving machine water is adequate and the water temperature can not exceed 35 ��, we recommend regular water changes and cleaning the cooling equipment. Cooling equipment for a long period of time not to use, or long-distance transport needs water excluded.

4. Open the front of the device to open the water system, and to ensure the normal use of the water circulation system. Winter in the laser tube can not have ice water.

Laser engraving machine notes [two]
5. In the winter when the temperature is very low should be noted that the power take off after the water discharge laser tube to prevent freezing.

6. If a direct or reflected laser beam to the body will cause great harm to the human body, especially into the eyes. Therefore, the use of laser engraving cutting machine should firmly adhere to the following rules:

a) Do not put any part of your body into the optical path to avoid being laser burns.
b) prohibit the observation of the laser through binoculars, microscopes, magnifying glass and the like.
c) in the table to prohibit discharge laser reflector.
d) When the place when not adjusting the laser line emitted from the laser too.

7. If the machine smoke machine would be harmful pollution at work lenses and lens. User opens the pump and fan, regular cleaning pump and fan in the dust.

8. If a malfunction or burst fire occurs, turn off the power immediately and stop using the machine lightning weather.

9. In the machine work or power is not cut off when the machine distribution box can not be opened. Machines are high-pressure operation. Non-professional staff can not open the machine.

10. The laser cutting machine should be placed on the ground. Not beating, shaking, punching machine, desktop laser engraving machine especially track.

11. The operation of the machine where the sliding contact surfaces and  shaft should be kept clean, so that the oil can always enter the hole.

Jinan MORN Technology Co.,Ltd is located in the high-tech development zone in Jinan city, north of China. Our company is the professional manufacturer and exporter of mechanical CNC router machine, laser machine and other relevant equipment.

Phone: +0086 531 66982237
Fax: +0086 531 88692337
Add:High-tech development zone,Jinan city
Our cnc router website:

Leave a Reply

Your email address will not be published. Required fields are marked *