Stepper motor as heart wood cnc router machine movement

wood cnc router machine stepper motor driver selection three matters.Stepper motor as heart wood cnc router machine movement, its importance is unquestionable. Here we take a small series and you look at the stepper motor drive. The main contents of the three considerations stepper motor driver selection.

First, the drive current: current is an important marker of the drive capability, the maximum current of the drive motor to wood CNC router machine be slightly larger than the nominal current, typically drive has 0.8A, 2A, 3A, 4A, 5A, 5.8A, 6A, 6.8A , 8A, 10A, 13A and other specifications.

Second, the drive power supply voltage. Supply voltage is to determine the ability to drive increases the speed signs, usually drive supply voltage: 12VDC, 24VDC, 40VDC, 80VDC, 110VAC and other specifications.

Third, the drive segments: segmentation is a sign of the control accuracy, the accuracy can be improved by increasing the subdivision. Segments can  increase motor stability, usually has a low-frequency vibration of stepper motor characteristics can be improved by increasing the breakdown, the motor runs very smoothly.

Our wood carving cnc router machine is mainly used to make wood works, wood router machine can do both cutting and 3D engraving works which are widely used for wood door, furniture, kitchen ware, windows, wood cabinet etc.

These are the engraving wood carving cnc router machine machine stepper motor driver selection three considerations specific content, I hope the above will certainly help you.

How CNC wood cnc router machine is equipped with a stepper motor drive

With CNC wood cnc router machine high efficiency, high-performance processing efficiency awareness, more and more customers in the purchase of equipment and the introduction of CNC engraving machine.

Customers in the engraving machine manufacturers advice and understand the equipment, the sales staff will often ask customers to choose a stepper motor or servo motor Relatively speaking stepper motor prices will be a lot cheaper.

So how customers should be equipped with stepper motor drive it According to current motor, equipped with greater than or equal to the current drive. If you need a low vibration or high-precision, can be equipped with a subdivision-type drives. For high torque motor, as far as possible with a high voltage-drive to get a good high-speed performance.

Secondly, wood cnc router machine stepper motor is also divided into two phases and five phases. 2-phase motors of low cost, but the larger the shock at the time of low speed, high speed torque CNC router machine down faster. 5 phase motor is less vibration, high-speed performance, high 30 to 50% higher than the speed of two-phase motor, the servo motor may be substituted in some occasions.

Customers can own processing required, select the appropriate
engraving machine drive motor, to achieve a more rational allocation.

Jinan MORN Technology Co.,Ltd is located in the high-tech development zone in Jinan city, north of China. Our company is the professional manufacturer and exporter of mechanical CNC router machine, laser machine and other relevant equipment.

MORNTECH-CHINA(FACTORY)
Phone: +0086 531 66982237
Fax: +0086 531 88692337
Email: info@morntech.com
Add:High-tech development zone,Jinan city
Our cnc router website:www.morntech.com

Leave a Reply

Your email address will not be published. Required fields are marked *