laser engraving machine at work

Laser Engraving Machine Operations Guide.Our company is a high-quality laser metal laser cutting machine engraving machine manufacturer, using a number of numerical study of patents, committed to the development of laser engraving machine, improvement, laser engraving machine note the following when using:

(1) When using the automatic measurement focus, pay attention to the automatic measurement focus rods must be tightened, otherwise the work surface to the top of the laser head and make it out of orbit.

(2) laser engraving machine at work, prohibit open the cover (cover and front cover), otherwise it will stop the laser emission, the impact of processing quality.

(3) When the workpiece, you must open and blow smoke exhaust equipment to prevent dust pollution focusing lens and reflector lens, otherwise it will affect the lens focus and reflection, and thus indirectly affect the processing strength, precision.

(4) the processing of wood, when the piece of paper, you must pay close attention to processing speed and processing intensity, to avoid too slow, too high intensity flame. Flame will damage the focusing lens, the light intensity of the impact of processing, precision, weight machines will not be used.

(5) For the early adopters and irregular co2 laser cutting machine workpiece, you must first make red light positioning to determine whether the processing position accuracy, or prone to waste.

Wood cnc router machine MT-C25B

This woodworking machine is economical type which with whole steel structure.

Adopting advanced DSP system, easy to learn and operate.
Y spindle adopts double motors to drive

High strength steel tube jointing.

It divided into 6 vacuum table-board.

With dust collect and vacuum table .

(6) the processing of thin wood, cardboard and other easily deformable material, to adjust the horizontal deformation amplitude difference of less than 1 mm, in order to avoid the focal length is too large, the impact of the machining accuracy. When working paper to paper fixed to avoid displacement occurs.

Cutting paper, especially soft quality paper (rice paper, Mao Bianzhi), you can simply stacked sheets Laser engraver for sale 15-20, soaked with water, after leveling, and then cut. This will improve efficiency, while avoiding the risk of burning due to the emergence  of the material.

(7) for cutting, to make the workpiece holder from 2 cm above the work surface, the back to avoid artifacts caused by damage to the laser reflection, produce waste.

(8) Clean the lens and focusing lens reflex: two fingers to pinch reflex lens, one hand with the photographic lens cleaning paper moistened co2 laser engraving machine with cleaning fluid and gently drag the lens surface, prohibit the use of finger pressure to avoid scratching the mirror; or with a cotton swab dipped into the camera lens cleaning solution and gently wipe the lens focus until smooth.

(9) is usually carved vector file, the resolution should be selected higher (500dpi or 600dpi); carving point Chen file, the resolution should choose lower (500dpi rough model or 300dpi). This sculpture will be good.

Jinan MORN Technology Co.,Ltd is located in the high-tech development zone in Jinan city, north of China. Our company is the professional manufacturer and exporter of mechanical CNC router machine, laser machine and other relevant equipment.

MORNTECH-CHINA(FACTORY)
Phone: +0086 531 66982237
Fax: +0086 531 88692337
Email: info@morntech.com
Add:High-tech development zone,Jinan city
Our cnc router website:www.morntech.com

Leave a Reply

Your email address will not be published. Required fields are marked *