diversified metal laser cutting machine and laser cutting machine etc

Talking about metal laser cutting machine and the difference between non-metallic.With the rapid development of laser technology, diversified metal laser cutting machine and laser cutting machine etc.

laser tube cutting machine products is greatly promoted the development of the industry. However, in the practical application of laser cutting machine, many people often do not know the metal and non-metal laser cutting machine laser cutting machine What is the difference, in the end the difference between metal and non-metal laser cutting machine in the wrong? The following is a metal laser cutting machine brief introduction!

In general, the cutting of non-metallic and is mainly used CO2 laser cutting machines, because the wavelength is about 10,600, is suitable for cutting non-metallic materials, and the metal material is preferably cut or YAG or fiber devices, because they wavelengths between 1060 and 1070, a metal material has a problem of this energy absorption wavelength.

1, high cutting precision: high cutting accuracy, precision metal parts for cutting, but you can cut a variety of fine craft Crafts hollow.

2, the cutting speed: cutting speed is  more than 100 times the speed of line cutting; small incision heat-affected zone, will not be deformed, slit flat, without subsequent processing.

3, the use of low cost: only similar CO2 laser cutting machine laser 1/10, the cost is only about 15 yuan per hour, CO2 laser cutting machine cost about 150-180 yuan per hour; ongoing maintenance costs low: only for the similar CO2 laser cutting machine 1/10 ~ 1/15, and equivalent efficacy CNC punch 1/3 ~ 1/4.

4, stable performance: suitable for continuous mass production (solid YAG laser is the most stable laser field one of the most mature product). If you can cut CO2 equipment that relies entirely on the energy of the hot melt. Because of the small power laser cutting machine generally only cut nonmetal, think it would have to buy power cut metal, specifically how many watts buy a laser machine that depends on your usage, general industrial grade laser cutting machine has 2500 watts, 3000 watts, 4000 wood carving cnc router machine watts, 6000 watts, the laser generator has domestic and imported points, see the individual as the case may be used.

Laser cutting machine how to maintain?

With the popularity of laser cutting machine, fiber laser cutting machine and metal laser cutting machine has been correspondingly rapid development of today’s laser device is by virtue of the advantages of high precision, high speed and high adaptability and so widely by people of all ages, but in practical applications of laser cutting machine, how to maintain the laser cutting machine has become the focus of people’s concern, then in the end how laser cutting machine maintain it? The following laser cutting machine manufacturers for a brief introduction.

1, once a week siphoning off dust and dirt with a vacuum cleaner inside the machine, turn off all electrical cabinets should be strict and dust.

2, the vertical degrees every six months to check the straightness of the track and the machine, found abnormal timely maintenance debugging. Did not do this, there may be cutting out the effect is not how good, the error will increase, affecting the cutting quality. This is the most important and must be done.

3, the guide should always clean, remove dust and other debris, ensure the normal rack to regular cleaning, lubricating, ensuring lubrication without debris. Rails should always be cleaned and the oil, there is the motor must be regularly cleaned and the oil, Laser engraver for sale the machine in the road will be better able to walk, more accurate cutting, cutting out the product quality will improve .

4, bifocal laser cutting head is fragile items laser cutting machine, long-term use, resulting in damage to the laser cutting head.

5, regular checks of laser cutting machine steel, ensures a certain tension. Otherwise, the problems in the operation, it is possible it will hurt people seriously can result in death.

Jinan MORN Technology Co.,Ltd is located in the high-tech development zone in Jinan city, north of China. Our company is the professional manufacturer and exporter of mechanical CNC router machine, laser machine and other relevant equipment.

MORNTECH-CHINA(FACTORY)
Phone: +0086 531 66982237
Fax: +0086 531 88692337
Email: info@morntech.com
Add:High-tech development zone,Jinan city
Our cnc router website:www.morntech.com

Leave a Reply

Your email address will not be published. Required fields are marked *