CNC engraving machine routine maintenance should be noted that several issues

Stone engraving machine should pay attention to what the problem selection.Power
Note that the function of stone engraving machine, engraving machine engraving motor has high power and low-power points. Some engraving machine is only suitable for smaller power processing color plates, architectural models, small signs, three-dimensional crafts and other materials, this process has been popular for some time, but because power is too small engraving greatly affected its scope of application.

Motor
To understand the performance and functionality, engraving machine engraving head motor stone carving motor is also very critical because the engraving head motors are generally not covered by the warranty, and wood CNC router machine engraving head motor is working long hours, so if the motor is not carved head good will affect the use of engraving machines.

motor speed range
Furthermore, is the head of the motor speed engraving adjustable range, speed adjustable range is typically a few thousand to thirty thousand revolutions per minute, if the speed is not adjustable or adjustable speed range is small, then it shows the engraving machine application on the subject is very major limitation since different materials must be engraved with a different engraving head speed.

the manufacturing process
Engraving machine body manufacturing process: Requires high-power engraving machine body work must be precise and stable, so that long-term high-power engraving casting body should be used in order to ensure its precision and stability.

Controller
The controller also generally divided into two categories: just do the drive controller, and all of its operational work done by the computer, work computer at the engraving machine in co2 laser engraving machine a wait state, unable to typesetting. Another controller uses when SBC or MCU control, this controller is actually a computer, so long as the engraving machine started working, the computer can immediately carry out other typesetting work, especially for a long time carving, the advantage is particularly evident.

screw and guide rail
Screw and guide rail is an important part of the stone engraving machine, a good screw and guide rail is to ensure its accuracy and performance of the engraving machine used for a long time.
CNC engraving machine routine maintenance should be noted that several issues
ban touch the tip and iron, iron hooks must use child or brush to clean;

prohibited by hand or in any other way contact is rotating spindle, workpiece or other moving parts;

ban process measurement of the workpiece, the speed, but can not wipe the piece with a cotton yarn, not cleaning the machine;

milling operation, the operator may not leave their posts immediately stop the machine found anomalies;

always check the bearing temperature is too high should be checked to find the persons concerned;
co2 laser cutting machine in the process, are not allowed to open the machine protection door;
strict adherence to personal responsibility, the use of the machine by hand, others use must consent;

Do not put the machine on beams and bumpers anything to avoid falling wounding;

Do not lie operation process on the machine, but not allowed to sit or lean on the machine frame.
Advertising engraving machine has what classification?

From the power level can be classified into two categories, one is low-power advertising engraving machine, and the other is the power of advertising engraving machine.

Low power consumption small engraving function, generally between 80 watts to 200 watts, since the power engraving machine is small, so is mainly used to engrave smaller items, for fine carving, such as badges, crafts processing etc.

Power high-power engraving machine is generally 700 watts or more, such engraving machine engraving machine includes a low-power features, can also be difficult sculpture, such as the production of crystal words, billboards, CNC router machine stone carving, material cutting and so on.

In contrast, the use of low-power engraving machine is very small, typically 80% of businesses are unable to meet, to pay attention to when choosing to buy based on the needs, not only the investment costs.

Jinan MORN Technology Co.,Ltd is located in the high-tech development zone in Jinan city, north of China. Our company is the professional manufacturer and exporter of mechanical CNC router machine, laser machine and other relevant equipment.

MORNTECH-CHINA(FACTORY)
Phone: +0086 531 66982237
Fax: +0086 531 88692337
Email: info@morntech.com
Add:High-tech development zone,Jinan city
Our cnc router website:www.morntech.com

Leave a Reply

Your email address will not be published. Required fields are marked *